Categories: Special Tools
Universal Coil Spring Compressor 2600 Kg
Login to view prices
› It is a tool used for quick and professional removal and installation of suspension struts.
› Designed for the McPherson struts with crown and cylinder springs
› High capacity of max. Load: 26,000 Nm
› Min. Spring diameter 80 mm
› Max. Spring diame
Categories: Special Tools
Universal Coil Spring Compressor 1200 Kg
Login to view prices
› It is used for quick and professional compressing of coil springs.
› The compression force is approximately 1200 kg.
› The maximum gap is 300 mm.
› It has 3 compressing head pairs that are
70-105 mm, 90-140 mm, and 130-190 mm long.
› It has a speci
Categories: Special Tools
Sprial Spring Strainer Device Universal
Login to view prices
› The spring compressor tool is an ideal product for installing and
removing the spiral spring on the front and rear axles.
› It has stepless adjustment, easy and safe use.
› Spring tension for spiral springs is 1500 kg (1.5 tons).
› Width 280 mm.
›
Categories: Special Tools
Triple Leg Reversible Puller 20-22 Mm
Login to view prices
Used to remove ball bearings. The opening range is 20-22 mm. The gap can be adjusted to two different positions from 30 to 55 mm.
Categories: Special Tools
Axial Joint Tool 35-45
Login to view prices
Used for fast and professional changing of the axial joints of cars and light commercial vehicles and automatic clamping of the joint heads. Provides easy assembly of long tie rods because of its open structure.
Saves up to 3 hours of working time.
›
Categories: Special Tools
Axial Joint Tool 28-35
Login to view prices
Used for fast and professional changing of the axial joints of cars and light commercial vehicles and automatic clamping of the joint heads. Provides easy assembly of long tie rods because of its open structure.
Saves up to 3 hours of working time.
›
Categories: Special Tools
Hydraulic Pull Back Ram 5 T
Login to view prices
› It is a hydraulic reverse puller used in passenger cars, heavy vehicles, tractors and situations that require reverse pull.
› Min. Length: 540 mm
› Max. Length: 670 mm
› Working Pressure: 68 Mpa
› Stroke: 130 mm
› Read the instructions before use.
Categories: Special Tools
Hydraulic Drive Shaft Puller Set
Login to view prices
Scope of delivery: 1 x BRIO driveshaft extractor set 3 in 1
Drive shaft extractor set is special product for hydraulic wheel hub puller for perfect assembly and disassembly of wheel bearings. Especially suitable for glued and rusted drive shafts moun
Categories: Special Tools
External / İnternal 3-Arm Puller 150 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 150 mm
› Hooked foot: 10.5 mm
› Hook length: 28 mm
› Min. clamping width: 25 mm
› Spindle length: 175 mm
› Hex drive size: SW 17
› Max. clamping width: 160 mm
Categories: Special Tools
External / İnternal 3-Arm Puller 100 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 100 mm
› Hooked foot: 10 mm
› Hook length: 25 mm
› Min. clamping width: 20 mm
› Spindle length: 150 mm
› Hex drive size: SW 15
› Max. clamping width: 110 mm
›
Categories: Special Tools
External / İnternal 3-Arm Puller 75 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 75 mm
› Hooked foot: 6.5 mm
› Hook length: 19 mm
› Min. clamping width: 80 mm
› Spindle length: 100 mm
› Hex drive size: SW 14
› Max. clamping width: 100 mm
›
Categories: Special Tools
External / İnternal 2-Arm Puller 200 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 200 mm
› Hooked foot: 18 mm
› Hook length: 37.5 mm
› Min. clamping width: 40 mm
› Spindle length: 235 mm
› Hex drive size: SW 19
› Max. clamping width: 225 mm
Categories: Special Tools
External / İnternal 2-Arm Puller 150 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 150 mm
› Hooked foot: 9.5 mm
› Hook length: 27.5 mm
› Min. clamping width: 25 mm
› Spindle length: 175 mm
› Hex drive size: SW 17
› Max. clamping width: 195 m
Categories: Special Tools
External / İnternal 2-Arm Puller 100 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 100 mm
› Min. clamping width: 20 mm
› Max. clamping width: 110 mm
› Gross weight: 710 g
› Surface finish: Galvanised, electroplated
Categories: Special Tools
External / İnternal 2-Arm Puller 75 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 75 mm
› Hooked foot: 6 mm
› Hook length: 19 mm
› Min. clamping width: 90 mm
› Spindle length: 100 mm
› Hex drive size: SW 14
› Max. clamping width: 110 mm
› H
Categories: Special Tools
5 Piece Trim Strip Set With Various Shapes
Login to view prices
Various shapes for working on trim strips, rubber gaskets, interior, door trims, switches, etc. Manufactured from high end special plastic. They have suitable packaging for wall hanging. They have the following technical properties:
› Length 160-200
You're viewed 16 of 25 products
Load More